LIQUID CHROMATOGRAPHY RELATED PRODUCTS

Cosmonice filter

Injection of samples containing particulates (microparticles, precipitates, colloid substances) will clog HPLC columns, shorten injector life, and result in extensive maintenance on pumps. Cosmonice filters are used to remove particulates from samples and prolong the life of HPLC system components. There are two types of Cosmonice filters as stated below.

Filter

W series (Aqueous solution)

W series are installed with low adsorption hydrophilic durapore filter (polyvinylidenedifluoride, PVDF). W series can be used with both aqueous and organic solvents. They are best suited for prefiltration of protein and other biological samples.

S series (Organic solvents)

S series are installed Teflon filter (polytetrafluoroethylene, PTFE) with strong resistance to organic solvents, acids and alkalis. They are best suited for prefiltration of samples with aggressive organic solvents such as chloroform and tetrahydrofuran.

Chemical compatibility

Ordering information

Product name Pore size Process volume Hold-up volume Connection Product number PKG size
Cosmonice Filter W (Aqueous)
4 mm
0.45 m less than 1 ml < 10 l Inlet: luer-lock
Outlet: luer-dlip

Connectable needles
06543-04 100 pkg
Cosmonice Filter W (Aqueous)
13 mm
0.45 m 0.5-10 ml < 30 l 06544-94 100 pkg
Cosmonice Filter W (Aqueous)
25 mm
0.45 m 3-50 ml < 100 l 06545-84 50 pkg
Cosmonice Filter S (Solvent)
4 mm
0.45 m less than 1 ml < 10 l 06541-24 100 pkg
Cosmonice Filter S (Solvent)
13 mm
0.45 m 0.5-10 ml < 30 l 06542-14 100 pkg

Cosmospin filter

Cosmospin filters are used to remove fine particles and precipitates from samples by centrifugation. They utilize Omnipore hydrophilic PTFE membrane filter, which has a wide range of chemical resistance. Cosmospin filters are the best choice for HPLC sample filtration. Two pore sizes, G (0.2 m) and H (0.45 m), are available.

Cosmospin

Chemical compatibility

Ordering informationa

Product name Pore size Maximum
sample volumn
Hold-up volume Maximum
Centrifuge force
Rotor size
(fixed-angle)
Filtration
area
Color Product number PKG size
Cosmospin Filter G 0.2 m 0.4 ml 5 l 5,000 x g 1.5 ml 0.2 cm2 brown 06549-44 100 pkg
Cosmospin Filter H 0.45 m 0.4 ml 5 l 5,000 x g 1.5 ml 0.2 cm2 white 06540-34 100 pkg

Dimention: Diameter 10.6 mm x Length 45 mm
Membrane: Omnipore Hydrophilic PTFE
Sample reservoir and collection tube: Polypropylene

Chemical compatibility

Solvent Cosmonice
W series
Cosmonice
S series
Cosmospin
Acetic acid, glacial ++ ++ ++
Acetic acid, 5% ++ ++ ++
Acetone -- ++ ++
Acetonitrile ++ ++ ++
Ammonia solution (conc.) ++ ++ -
Ammounium hydroxide (6N) ++ ++ ++
Amyl alcohol ++ ++ ++
Benzene ++ ++ -
Benzyl alcohol (1%) ++ ++ --
Boric acid ++ - ++
Butyl acetate - ++ -
Carbon tetrachloride ++ ++ ++
CelloSolve (ethyl) solvent ++ ++ ++
Chloroform ++ ++ ++
Cyclohexanone -- ++ --
Dichloromethane ++ ++ --
Dimethylacetamide -- ++ ++
Dimethylformamide ++ ++ ++
Dioxane ++ ++ ++
DMSO -- ++ --
Ehtyl alcohol ++ ++ ++
Ethers ++ ++ ++
Ethyl acetate ++ ++ ++
Ethylene glycol ++ ++ ++
Formaldehyde ++ ++ ++
Freon, TF or PCA solvent ++ ++ ++
Gasoline ++ ++ ++
Glycerine (Glycerol) ++ ++ ++
Hexane ++ ++ --
Hydrochloride (6N) ++ ++ ++
Hydrofluoric acid -- ++ --
Hydrogen peroxide (3%) ++ ++ -
Hypo (photo) ++ ++ ++
Isobutyl alcohol ++ ++ ++
Isopropyl acetate ++ ++ ++
Isopropyl alcohol ++ ++ ++
Kerosene ++ ++ ++
Methyl alcohol ++ ++ ++
Methyl ethyl ketone -- ++ ++
Methyl isobutyl ketone ++ ++ --
Nitric acid (6N) ++ ++ -
Nitrobenzene ++ ++ --
Ozone (10ppm in water) -- ++ --
Paraldehyde - ++ -
Pet base oils ++ ++ ++
Pentane ++ ++ --
Petroleum ether ++ ++ -
Phenol (5.0%) ++ ++ --
2-Propanol ++ ++ ++
Phosphate buffer solution ++ - ++
Seawater ++ ++ ++
Silicone oils ++ ++ ++
Sodium hydroxide (conc.) ++ ++ ++
Sulfuric acid (6N) - ++ -
Toluene ++ ++ --
THF -- ++ -
Trichloroacetic acid ++ ++ ++
Trichloroethane ++ ++ --
Trichloroethylene ++ ++ --
TFA ++ ++ --
Xylene ++ ++ ++

++: Recommended, --: Not recommended, (brank): No data

▲Page top


Tea Time